Dante AVIO-A-4OUT-EB 4-Channel Analogue Output Install Adapter with Euroblock
- check Trusted New Zealand audio supplier
- check Fast nationwide shipping
- check Expert advice & installation support available
100% Secure Checkout
Guaranteed Secure
DESCRIPTION
The Audinate Dante AVIO-A-4OUT-EB converts four channels of Dante network audio to balanced or unbalanced analogue line outputs over Euroblock screw terminals. It is built for installers and integrators feeding amplifiers, powered loudspeakers, assistive listening systems or local zone processors from a Dante network, without the cost of a full I/O frame.
Channel count is four at 44.1/48 kHz, or two at 88.2/96 kHz, with 16, 24 or 32-bit PCM and selectable Dante device latency of 1, 2 or 5 ms. Maximum signal level is switchable between +4 dBu, 0 dBu, 0 dBV and -10 dBV to match consumer or professional destination equipment. Two 100 Mbps Ethernet ports with an integrated switch allow up to four adapters to be daisy-chained from a single network drop, with PoE passed downstream. Configuration and routing are handled in Dante Controller alongside the rest of the system.
- 0 in / 4 out Dante to analogue conversion, 6-pin Euroblock at 3.5 mm pitch
- Dynamic range 105 dB (AES17 A-weighted at 0 dBFS), THD+N 0.0019% at 1 kHz
- Frequency response 20 Hz - 20 kHz ±0.2 dB; crosstalk -118.5 dB at 10 kHz
- Output impedance 300 Ohm balanced / 150 Ohm unbalanced
- IEEE 802.3af Class 3 PoE, 2.5 W standalone and up to 12 W daisy-chained
Mounting bracket and ClickGrid snap-together mounting suit fixed installation in houses of worship, corporate AV, education, hospitality and theatre.
SHIPPING INFO
RETURNS & WARRANTY
Frequently Asked Questions
Everything you need to know about our products, ordering and services.

